MONTANA VARNISH SPRAY - MATTE - 400 ML

MONTANA VARNISH - T1010 - 400 ML

Acid-free, quick drying, clear varnish made of acrylic base. No yellowing or de-saturation. For interior and exterior use. Can be used for art, hobby, crafts and DIY. Available in gloss, semi-gloss, matte finish. Gloss level shown on donut (see top of can). Protects and fixes paint on surfaces like canvas, paper, charcoal drawing, bast fibre, wood, photos, etc. Protects against oxidation and UV light. The more coats applied, the stronger the UV protection. During application, protect the object and the surrounding area from spray. Surfaces should be dry, clean of dust, oils and rust before applying the varnish.

Shake can well for 2-3 minutes upside down to take advantage of gravity. Remove the safety ring by removing the nozzle and turning the can upside down allowing it to fall out. Then re-apply the nozzle. Apply varnish in several thin layers, spraying before the previous coat is fully dry  but with 2 minutes between each pass. Further coats might require a drying time of 24 hours or more depending on substrate.  For optimal lifespan, always store cans with the nozzle on. NOT COMPATIBLE WITH SYNTHETIC BASE LACQUERS. Always test spray on a non-visible area to check compatibility of lacquer or paint.

How to use: Shake can well for 2-3 minutes upside down to take advantage of gravity. Remove the safety ring by removing the nozzle and turning the can upside down allowing it to fall out. Then re-apply the nozzle. Apply varnish in several thin layers, spraying before the previous coat is fully dry  but with 2 minutes between each pass. Further coats might require a drying time of 24 hours or more depending on substrate.  For optimal lifespan, always store cans with the nozzle on.