MONTANA GOLD FLAME BLUE - 400 ML

MONTANA GOLD - 400 ML - FLAME BLUE

Montana Gold aerosols are among the best acrylic sprays on the market.
Thanks to the low pressure you can easily apply a controlled matte layer.
The highly pigmented paint guarantees good coverage and dries quickly.

Suitable for multiple surfaces such as concrete, steel, wood, glass, etc. If you have doubts about the surface, apply a primer first. To get the most beautiful contrasts you can first apply Montana Shock white or Montana Shock black. (See related products).

The Flame blue is a beautiful blue UV color, luminous when using blacklight / UV lighting. Montana Gold is widely used to make the most beautiful graffiti.

We offer de Montana Gold UV range in de following colors: Gleaming Pink, Flame Blue, Fire Red, Acid Green, Power Orange, Flash Yellow, Disco White. 

What is the difference between Montana Gold and Montana Black?

The biggest difference is the pressure in the aerosol, the Gold is a low pressure and the Black is a high pressure. Most users find the Montana Gold easier to use because it gives more accuracy.
With the different caps you can choose the different spray widths. (Sold separately). For the Gold this is 0.4cm to 25cm while the Black can handle 1cm to 30cm due to the higher pressure.

For optimal lifespan, always make sure to store with the nozzle on the can.

1. The safety ring is easy to remove - just lift up the nozzle and turn the spray can up side down and the ring will fall out.
2. The ring helps to avoid accidental triggering in transport or storage.
3. Turn the can upside down. Strike the bottom of the can against the palm of your other hand.
4. Repeat this several times to make sure to loosen up the ball bearings* from the pigments in the can.
5. Once the ball bearings* are loose, keeping the can turned upside down (advantage of gravity) and shake.
6. Then shake the can vertically for at least 2 minutes.
7. After you have shaked the can well put the nozzle back on the can. Fix carefully with your finger and make sure that it fits.
8. Make sure to always do the first spray on a test surface first, as the top of the valve system may harbor more solvent than pigment on the first shot. This is normal.

PRODUCT DETAILS

• Delivery content: 1 aerosol
• Color: Flame blue
• Content: 400ML
• Lacquer base: Acrylic paint
• Cap: skinny cap
• Fast drying and weather resistant
• Available in 7 colors
• Warnings:Wear protective equipment when working with this paint, face mask, gloves and goggles. The paint ishighly flammable, harmful in contact with the skin, causes skin irritation, causes serious eye irritation and is harmful if inhaled.
  

Please note, this paint is a UV paint and lights up with blacklight / UV lighting.
It is not a glow in the dark paint that glows in the dark.